The finderscope should remain in alignment unless it gets bumped, e.g., transporting or moving your telescope in and out of the house. Now anything you point the finderscope at (such as the moon) will also appear in your eyepiece. The time spent aligning your finderscope during the daytime will save you from a lot of frustration while trying to locate objects under the night sky. You can double-check your alignment by using the finderscope to select another randomly chosen target to see if it’s in the main scope. Once the crosshairs are centered on the same object you are viewing through the telescope eyepiece, the alignment of the finderscope is done. Turn the 3 small round thumbscrews on the sides of the finderscope bracket to adjust the direction the finderscope is pointing. Now look through the finderscope, and you will notice the crosshairs are most likely not centered on the same target. FREE Shipping on orders over 25 shipped by Amazon. Using your lowest power eyepiece (the one with the highest focal length number printed on it), look into the eyepiece of the main scope and center it on a target. donated her time and effort to help out folks with Jason 311 telescopes. SVBONY 40mm 1.25 inches Plossl Telescope Eyepiece Fully Multi Green Coated Metal 40 Degree Apparent Field 4 Element for Astronomy Telescope. Take your telescope outside during the daytime, and aim the scope down the street towards the top of a telephone pole, street sign, or license plate on a car (or any small target that's easily recognizable from a few hundred yards away). This is best done when the scope is first set up. The finderscope is the small scope attached near the rear of the telescope just above the eyepiece holder. If you are unable to find objects while using your telescope, you will need to make sure the finderscope is aligned with the telescope.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |